Oem preinstallation kit opk xp

Multiple computers on which you apply the same image that you created on the master computer and which will be sold or distributed to customers.

A network share that contains the source files and possibly custom answer files for a Windows product that you plan to preinstall. A collection of files and folders sometimes compressed into one file that duplicates the original file and folder structure of an operating system. It often contains other files added by the OEM or corporation. A fully-assembled computer containing a master installation that you can copy to destination computers. A customized installation of Windows that you can duplicate onto one or more destination computers.

A preinstallation method that uses at least two computers including a technician computer as the main data store and a master computer for the preinstallation , a configuration set, and a Winbom. A preinstallation method of using a single, stand-alone computer, the Windows product CD, and a Winnt. If you use this limited method, you will have to preinstall manually.

A tool that prepares the hard disk on a master computer for duplication to destination computers. A computer connected to a network on which you build configuration sets with Setup Manager. The technician computer usually contains the distribution share and the OPK documentation. The generic name for the Windows Setup answer file. In the CD boot preinstallation method, Unattend. Benefits of Using a Network for Preinstallation The following table presents the advantages and disadvantages of two methods of preinstallation: Networked Preinstallation.

Requires more work in advance to configure the network environment, but allows more flexibility in the manufacturing environment. It is significantly easier to create build-to-order computers. Restricts third-party drivers only to massstorage devices. You must load these drivers by pressing F6 during the first boot of the operating system. Enables you to use a configuration set.

You can update drivers and use the Winbom. Does not enable you to gain access to a configuration set to customize or brand the Windows installation. Less flexibility in customization. Enables you to auto-partition or format the hard drive before Setup starts by using the [DiskConfig] section in Winbom. Save valuable time by automating the entire preinstallation process. Fully automate network connectivity in a bit environment. Automate copying of custom OEM logos and the Oeminfo.

Enable preinstallation of applications using the Winbom. Automatically process the [Factory] section of Winbom. Automatically add customized Internet Explorer branding, including a search page, custom toolbar buttons, a custom home page, as well as additional customized Favorites and Help and Support pages.

Automatically copy and execute Sysrep. Automatically start Audit mode. In addition, if you do network installations, you do not need to open all CDs from the 3pack because the source files are copied from one CD one each for Home Edition or Professional to your technician computer only once.

You should ship the remaining unopened packs with each new computer that you preinstall by using the configuration set you built. While a network-based process is the recommended approach, it is possible to perform a CD-based preinstallation without a network. For information on this process, refer to Appendix A. Overview of the Preinstallation Process Before you begin, set up one of the following configurations listed in order of preference. A technician computer that contains one network adapter, plus a network router or a server running Windows Server that is configured as a DHCP server.

In addition, you need a master computer that also contains one network adapter. This option gives you the maximum preinstallation flexibility. A technician computer that contains two network adapters or a network adapter and a modem. Your technician computer must be running Windows XP. A technician computer that contains one network adapter, plus a crossover cable to connect to a master computer that also contains one network adapter.

You can preinstall Windows without using a network; however, you lose considerable flexibility in doing so. As discussed elsewhere in this document, not using DHCP makes your preinstallation process more complex. Selecting this check box copies a modified version of the Winbom. Restore the image over the network to the destination computers. Or copy the image from the technician computer onto the destination computers.

Note Alternatively, you can burn a CD containing the image and imaging software, and use this CD to start and configure the destination computers.

Build Build an an image image of of the the installation installation and and store store itit on on the the technician technician computer computer Deploy Deploy image image from from the the technician technician computer computer onto onto the the destination destination computer s computer s.

Set up the new hardware and software, and identify any applications that you want to install. If the CD does not start automatically, double-click Setup. Only one version of the OPK tools and documentation can be installed on a technician computer. Run Opk.

This is the autorun file, which automatically starts when you insert the CD. The preferred method is to use Setup Manager. When you use this method, your existing configuration sets still work. Run Setup Manager. Save the configuration set and complete Setup Manager as you normally would. The first time you upgrade the OPK toolkit, the OPK installation program automatically detects and upgrades the set of tools in the corresponding language.

Sharing the OPKTools and Application Folders Make sure that your OPKTools folder and any folders containing applications that you want to install are shared and that you have created appropriate user accounts to access them. To share a folder, right-click it, click Sharing and Security, and then click Share this folder. After you run Setup Manager and create your first configuration set, you can share the OPKTools folder if you have not already done so. Type a new user name and password that you will use during the application preinstallation phase.

On the Name the new account page, type a name, and then click Next. On the Pick an account type page, select Computer administrator, and then click Create Account. Important For the preinstallation to work properly, you must share the OPKTools and application folders, and then create user accounts for accessing them.

For example, use the user name opkuser and a password for the OPKTools folder; and use the user name appuser and a password for the applications folder. To start Setup Manager 1. Double-click the Setupmgr. The first page of Setup Manager will appear. However, the functionality is the same. On the first page of Setup Manager, you can prepare the automated preinstallation of Windows XP on your destination computers the computers that you will sell to your customer.

Setup Manager will save the settings that you choose in a configuration set. To avoid seeing this page the next time you run Setup Manager, select the Skip this page next time check box. When you are ready to continue, click Next. Configuration Set On this page, create a new configuration set, or edit or copy an existing one.

Because this is your first time running Setup Manager, you can choose to create a new configuration set. To modify an existing configuration set 1. Click Edit or copy an existing configuration set. In the Existing configuration sets list, click the configuration set that you want to use, and then click Next. If you select this option, you must download the source files and run Windows Setup.

Completing this type of installation does not reseal the computer. The computer restarts into Audit mode. Reseal when finished: Based on the above installation mode, this mode automatically reseals the computer without enabling further customization. To enable further customization after restart, select Factory. To restart into the default end-user experience either Windows Welcome or Mini-Setup, depending on the version of Windows that you install , select End user.

Copy files only: This installation mode provides you access to the command prompt after the file-copying portion of Setup finishes and before first-boot processing occurs. You have the option of disk duplication and other customization.

By default, auditing is not set in this mode. Resealing is the last step in the preinstallation process. It prepares the computer for delivery to the end user and sets the computer to start into either Windows Welcome or Mini-Setup depending upon the Windows product that you install.

You are required to reseal the computer before delivering it to the end user. Location of Settings The settings from this page are saved in this location: Winbom. To specify the target product 1. In the Products list, select the product that you want to install, and then click Next. Setup Manager will copy the product files to your computer.

When the destination computer runs Windows XP, branding information appears automatically in Control Panel, on the General tab of the System Properties dialog box. To specify your branding information 1.

In the Manufacturer box, type your manufacturer name. This is required information. In the Model box, type the model of the computer. This is optional information. In the Provide information on how your customers can get support box, type how the end user can obtain support.

Spell all items exactly the way you want the text to appear in the product. Include telephone numbers and hours of operation for your technical support group. Include information for several countries or regions with a common language and different support information.

Do not list Microsoft in the support information section—you are responsible for supporting Windows XP on all computers that your company ships.

Localize the required [Support Information] section in Oeminfo. Microsoft includes only an English U. Do not include any information, such as the version number of the Windows XP operating system that could change when the end user upgrades to the next version.

Do not include any information in the [Support Information] section that does not directly pertain to support. Location of Settings The settings from this page are saved in this location: Oeminfo. This Product Key will be set to blank when you reseal the computer for final shipment to the customer. Notes The Product Key setting is saved in the unattended installation file if you use Unattend.

Preinstalled Applications Use this page to define entries that start application setup programs or. The steps that you complete to preinstall other programs will differ depending on the program.

To specify the programs to start during auditing 1. On the Preinstalled Applications page, click Add. The Add an Application dialog box will appear. In the Add an Application dialog box, in the Display name box, type the name of the application as you want it to appear in the user interface. If you want to specify a Universal Naming Convention UNC path, click Browse to find the location of the Windows Setup program in a folder on a mapped network drive or a local folder that is shared.

This command line sets up that program to run during auditing. The Standard installation mode automatically invokes auditing during the Windows XP preinstallation.

Click Advanced if you want to specify the type of setup program, restart the computer after installing, or select staging options.

Staging an application: If you want to install a particular application on most of your computers, consider including a staged version of the application in the master installation. To stage an application means to make all the files available locally.

When an application is staged on the hard drive, the application setup program is required only to make the relevant changes in the registry, eliminating time-consuming copying of files.

On the Preinstalled Applications screen, you can also edit the preload parameters by selecting the item on the list and then clicking Edit. You can also change the order in which the setup programs run by selecting an item and clicking the arrow buttons to the right of the list to move that item. To specify network access credentials for this configuration set only 1.

Select the Specify credentials for connection to network resources in Factory mode check box. Type the password in the Password and Confirm password boxes. Important Type the user name and password that you created earlier for the application preinstallation phase for example, appuser.

Specifying credentials for this configuration set does not change the credentials specified in the distribution share settings. If you do not specify credentials for this configuration set, Setup Manager uses those specified in the distribution share settings. You can view or change the distribution share settings by clicking the Tools menu, and then clicking Distribution Share.

To set up the installation of Plus! You will see this only if you look at the Winbom. Make sure that all of your folders are shared and that the user account that you created has access to the shares.

Registration is required in the Microsoft Partner Program to gain access to it, but registration at the free level will suffice. ISO file just fine. You do not need to give a tax ID or anything like that. To clear up any legal issues, read this:.

That and the pack were the only methods I was aware of to obtain the OPK. Here's the link:. You will be prompted for a Passport user ID and password. If you register at the link below, that should take care of you.

So let me be upfront in saying, "no I will not send you a copy". If you register at the link above, you can obtain your own copy. Thanks for this info. I can now choose english build instead of my localized french OPK i already have. It's been awhile since I registered there. But make sure you create a. If you are not signed in with your.. Give them your information. Make sure you select the Registered level. Eventually you are a registered partner. I remember selecting system builder along the way--that is important.

Once you are registered, you simply sign into the site with. Net passport. There is also a great page at the site with all of the hot fixes in there as well as the silent install switches for each one! I didn't post it originally because every time I went to the download page, I was prompted for my Passport. I'm surprised the download link isn't password protected. Dec 29, 3, 0 Original equipment manufacturers OEMs who build new computers from individual hardware components can use the tools in this kit to preinstall and configure all operating systems in the Windows XP family of operating systems: Windows XP Home Edition Windows XP Professional Windows XP Bit Edition These same tools and processes can be used to preinstall and configure the Windows Server family of operating systems.

The availability of particular Windows operating systems varies by the type of OEM license agreement. Availability also varies by language. OEM Preinstallation Kit Goals The goals of this guide are to: Ensure a consistent user experience of the core functionality of the Windows operating system. Enable you to brand and customize any product in the Windows family of operating systems. Enable you to quickly and easily preinstall additional applications and device drivers that are not already part of the operating system.

Reduce illegal software piracy. Provide flexible methodology and tools to help optimize your manufacturing process, whether you build ten or 10, computers per month. Preinstallation Requirements It is important that you read this guide to ensure that you understand how to use the tools, and to ensure that you are aware of the preinstallation requirements that apply to your license agreement. As a manufacturer who distributes Windows with new computers, you are required to preinstall the OEM-specific version of the Windows XP operating system.

Do not preinstall a retail version of Windows XP. You must also run Sysprep. For a complete summary of requirements, see the topics in the Preinstallation Requirements and Customization Guidelines section. This allows you to uniquely brand and identify the Windows installation with your company identity. Some of this information is optional, and some is required by the terms of your license agreement. Adding Your Branding and Logo You can insert your logo, company name, and model name in key places in the user interface, including support contact information.

It contains the minimal functionality you need to run Windows Setup, pull an operating system from a network share, automate basic processes, and perform hardware validation. WinPE provides the following features: A hardware-independent Windows environment for both xbased and Itanium-based architectures, with a small footprint on both the bootable media and in memory.

You can easily add or remove network drivers from a customized version of WinPE. Support for all mass-storage devices that use Windows or Windows drivers.